Installation Instructions

*Android app for versions 4.4 and above.
*Android users need to allow all the requests about this app from Android system.
Step 2: Enable Bluetooth on your smartphone under the smartphone Settings section. If your
smartphone has Bluetooth enabled, you can skip this step.
Step 3: Insert two AAA batteries into the battery compartment on the back of the thermometer in
correct polarity (+) and (-) as indicated.
Step 4: The temperature and humidity will be displayed on the screen and the Bluetooth icon
will be flashing at the top of the display. The Bluetooth icon will be flashing for 2 minutes
which indicates that the thermometer is ready for pairing to your mobile phone.
Step 5: Launch ThermoPro Sensor APP and press to add a thermometer. The
thermometers will be shown on a list and select one to pair. Once pairing is complete, the
Bluetooth icon on the thermometer display will stop flashing and the current temperature and
humidity will show on the APP. If the Bluetooth icon stops flashing and you haven’t finished
the pairing, press and hold the button for 2 seconds and the will be flashing again ready
for pairing.
Done! Your ThermoPro Bluetooth Thermometer is ready for use!
Any questions or need more help with setup, please feel free to contact us.
Declaration of Conformity
Hereby, the manufacturer declares that this product with the basic requirements and applicable
regulations of the Radio Equipment Directive 2014/53/EU, the EMC Directive 2014/30/EU. The
complete declaration of conformity can be found at:
https://itronicsmall.com/eu-declaration-of-conformity/ complies
Disposal of the electronic appliance
This electronic appliance should not be disposed of with normal household waste.
Dispose of the unit at an approved facility or at your local recycling center. Please
observe the current rules and regulations when disposing of the appliance. Contact your local
council if in doubt.