Installation Instructions

ManualsBrandsSHENZHEN ECARE ELECTRONICS ManualsElectronicsBluetooth Humidity Temperature Monitor

Bluetooth Thermometer/Hygrometer

Model No. TP359

According to the operating system of your smartphone,

scan the following QR code to download and install.

Introduction

Congratulations on your purchase of a Smart, Remote Bluetooth-connected

Thermometer/hygrometer. You will now be able to remotely monitor the temperature and

humidity of your living room, bedroom, greenhouse and etc. from your smartphone.

Features



1. Temperature range: -4˚F to 140˚F (-20˚C to 60˚C)

2. Temperature accuracy: +/-0.5˚F (+/-0.3˚C)

3. Humidity range: 10% to 99%

4. Humidity accuracy: +/- 2%

5. Power source: 2 X AAA batteries (3V)

6. 2.4GHZ wireless Bluetooth function, connect to mobile app via Bluetooth module

7. ˚F /˚C button: press it to toggle the temperature display unit between ˚F and ˚C

8. button: press and hold it for 2 seconds to



enter pairing status

9. button: press it to turn on/off backlight

10. CLEAR button: press and hold it for 2 seconds to clear the maximum and minimum

humidity/temperature readings recorded in last 24 hours

Usage

Follow the simple steps below to set up your ThermoPro Bluetooth

Thermometer/Hygrometer and remotely monitor the temperature and humidity of your

living room, bedroom, greenhouse and etc. from your smartphone!

Summary of content (4 pages)

PAGE 1
Bluetooth Thermometer/Hygrometer Model No. TP359 According to the operating system of your smartphone, scan the following QR code to download and install. Introduction Congratulations on your purchase of a Smart, Remote Bluetooth-connected Thermometer/hygrometer. You will now be able to remotely monitor the temperature and humidity of your living room, bedroom, greenhouse and etc. from your smartphone. Features 1. Temperature range: -4˚F to 140˚F (-20˚C to 60˚C) 2. Temperature accuracy: +/-0.5˚F (+/-0.
PAGE 2
Step 1: Download and install the “ThermoPro Sensor“ App. Scan the QR code above, or search for “ThermoPro Sensor” on the Apple Store for IOS devices or on the Google Play Store for Android devices. Download the App and install it on your smartphone. *iPhone and iPad apps for IOS 9.0 and above. *Android app for versions 4.4 and above. *Android users need to allow all the requests about this app from Android system. Step 2: Enable Bluetooth on your smartphone under the smartphone Settings section.
PAGE 3
This electronic appliance should not be disposed of with normal household waste. Dispose of the unit at an approved facility or at your local recycling center. Please observe the current rules and regulations when disposing of the appliance. Contact your local council if in doubt. Limited One-Year Warranty ThermoPro warrants this product to be free of defects in parts, materials and workmanship for a period of one year, from date of purchase.
PAGE 4
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.