Instruction Manual
6. If you have registered more than one sensor, press the CHANNEL/SYNC button on the base station to
select the remote channel you want displayed permanently on the base station. Press CHANNEL/SYNC button
until you observe a circular arrow on the base station LCD display under the channel number. The unit will then
auto-scroll, changing from channel to channel every 5 seconds.
Place the Base Station and Remote Sensor
1. The indoor base station (receiver) should always be placed in a well ventilated indoor area and located
away from vents, heating or cooling elements, direct sunlight, windows, doors, or any other openings.
2. The remote sensor (transmitter) can be placed on a flat surface indoor or outdoor. Make sure the sensor is
within the transmission distance from the base station and with minimal obstructions.
3. The base station and remote sensor can both be wall mounted
PURCHASING ADDITIONAL REMOTE SENSORS
The model number of the remote sensor for this unit is TP-61.
Additional sensors may be ordered directly from Amazon or ThermoPro by contacting our customer service
listed below.
Hints and Tips
If the receiver does not connect to the transmitter, try the following:
Press and hold the CHANNEL/SYNC button on the base station and then press TX button on the
transmitter.
Relocate the base station and/or the remote unit until connection is found.
Signals from other electronic devices may cause interference. Place the base station and receiver
away from these devices.
The transmitter may not function properly in extreme temperatures due to battery power. Replace the
batteries or the unit will resume proper function in more moderate weather.
Warnings
Do not subject the unit to excessive force, shock, dust, temperature or humidity.
Do not immerse the unit in water.
Do not remove any screws.
Do not dispose this unit in a fire. IT MAY EXPLODE.
Keep unit away from small children. The unit or parts of the unit might be a choking hazard.
Never attempt to recharge the batteries using any other methods.
Dispose of the unit legally and recycle when possible.