User's Manual

7.2 Vibration Alarm

Conditions: When the Vehicle Vibration occurs.

Note: You need to set vibration sensitivity and time,

there is an alarm switch.

7.3 Collision / falling Alarm

Conditions: When Vehicle Collision or falling

occurs.

7.4 Speed Alarm/Cut engine when

over speed

Alarm Conditions: When vehicle speed over and

below the setting speed.

Cut engine Conditions: Cut engine when over

setting speed (Restore engine after returning

setting speed)

Note: You need to set the low speed limit and the

high speed, and an over-speed setting to cut engine

7.5 Shift Alarm

Conditions: When vehicle occur a setting shift in the

Flameout status.

Note: Only valid in flameout state and vehicle occur

a setting shift distance.

7.6 Geo-fence Alarm

Conditions: when the vehicle entry / exit / across

the Geo-fence.