USER MANUAL Body worn camera
About this Guide The content in this document is for information purpose and is subject to change without prior notice. We have made every effort to ensure that this User Guide is accurate and complete. However, no liability is assumed for any errors or omissions that may have occurred. The manufacturer reserves the right to change the technical specification and accessories without prior notice. Caution Do not expose battery being placed in high temperature environment.
TABLE OF CONTENTS About this Guide Caution Note Introduction 1. Introduction 2. Box Contents 3. Product Overview 4. Main Menu Optional Detail 5. Operation 6. Camera setting through Camera Manager This camera is new generation video recorder of High Efficiency video coding (HEVC, H.265) and low power consumption. If you record videos by using H.265 coding format, it is suggested to download Media Player Codec Pack (check below link) to assist to play back H.265 videos on windows Media Player. https://www.
1. Introduction Thank you for purchasing this product. This camera is specially designed for video recording, audio recording and photo shooting. Please read the user manual before you start to use it. Important information: before you start to use this device, please connect it to computer through auxiliary USB cable, then camera will require password in the LCD screen.
3.
Item Description 1. Status Indicator LED Still Green: camera is in standby mode (Power on but not recording) Still Red: camera is on pre-recording mode Flashing Red: camera is recording video Flashing Yellow: camera is recording audio only 2. Charging Indicator LED Red: Charging Status Green: Camera is fully charged 3. Pogo Pin Connection port to charging dock 4. Light Sensor Detect changes of light and turn on/off IR for low-light recording automatically 5.
11. LCD Screen View camera status and playback recorded files 12.Scroll Up Button a) Hold to switch 720P and 1080P resolution b) In Menu or Playback mode, short press to scroll up to previous page or file c) In standby or video recording mode, hold to zoom out d) In playback mode, press to rewind video 13.
LCD Interface: 7
4. Main Menu Optional Detail To enter the setting menu: 1. Press Menu button and then enter the password. 2. Enter the password by the following commands: ⚫ Press Scroll Up button to change the character to the previous letter or number. ⚫ Press Menu button to change the character to the next letter or number. ⚫ Press OK button to confirm and move to the next character 3. PS: The default password is 000000. After selecting the last character, press OK button to enter the setting menu.
Pre-record When on, a certain time (depend on video resolution) will be combined into the recorded video before record button is pressed to start recording; When off, video start until the Record button is pressed to start recording. OFF, ON Post Record The amount of the time the camera waits to stop recording video after you press the Record button. OFF, 5 sec, 1 Min, 10 Mins, 20 Mins, 35 Mins Dewarp When on, video distortion correction will be corrected, with more power consumption.
Slideshow When on, viewing photo file will start a slideshow where each photo will be shown for around 5 seconds. OFF, ON Infrared When set to manual, you will need to hold Snapshot button to turn IR LEDs on/off. When set to Auto, these lights will activate automatically based on the light sensor's reading. Manual, Auto Motion Detect When turn on motion detect and then press recording button, camera will start recording when front movement is detected by the lens.
Auto Power off The amount of the time the camera can be idle before powering off. OFF, 30 seconds, 1 Min, 3 Mins, 5 Mins Led Light When on, indicator LED will tell the status of the camera; When off, camera is entering covert mode OFF, ON White Led White Led light to offer light source OFF, ON Key Tone When on, camera will play a tone each time you press a button. When off, tone is disabled. OFF, ON Motor Switch of vibration indication OFF, ON Volume The volume of camera speaker.
5. Operation 5.1 Power on/off Hold Power button for 3 seconds to start up and enter standby mode; In any mode with holding Power button for 3 seconds, camera will shut down. PS: in standby / video recording / audio recording mode, short press power button , screen saver can be on/off. 5.2 Audio recording In standby mode, press audio Recording Button for audio recording. Camera will beep, and vibrate once and LED indicator on the top turns yellow and flashes.
5.7 Zoom In standby or video recording mode, hold Scroll Up button and scroll down button to zoom out and in the image. 5.8 IR night vision Under dark circumstances, infrared LED will help to record clear image or video. In standby mode, PRESS Menu button to navigate. Find option 【Infrared】, PRESS OK button to enter sub-menu: Manual & Auto, press OK button to select.
playback; PRESS scroll-Up button to rewind, PRESS Scroll-down button to fast forward, then PRESS OK button to play normally. You can fast forward or rewind 2x, 4x, 8x, 16x, 32x, 64x. 2) In photo file playback mode, hold scroll-Up button and Scroll-down button to zoom out and in the image. Adjustable is X1.0～X10.0. In the zoom in and out image, short press scroll-Up button and Scroll-down button to move the image to right or left side. 5.
5.14 Video/Photo/Audio files can only be deleted on PC/laptop. After being connected to PC, password interface shows up, please enter the password (default password is 000000) Press the (ok) button 6 times, the camera will be recognized by the computer as Extra drive. User can go to camera folder and delete those files not needed. 5.15 Charging When camera battery is low, the battery icon will flash in the display, and you will hear a alert tone. When this happens, charge the camera.
5.16 WiFi AP mode - used for single device real time video review and controlling. Android phone: Scan below QR code Apple iphone : Search ”Eeyescam pro” in App Store Go to camera menu and Turn on “WiFi”. You will see GREEN WiFi icon on top of screen.
Go to phone/tablet WiFi setting. Find out your body camera’s WiFi SSID (H22_WIFI_AP as default) and select, then input WiFi password (12345678 as default) and connect. Open Eyescam Pro and tap “connecting device” to enter camera interface.
Tap resolution window to change video resolution. Tap setting icon to enter simple setting menu. Tap RED button to start/stop video recording. Tap PHOTO button to make a snapshot.
19
Tap “Recorder File” to view or delete the video and photo files.
STA mode - used to view and control multiple cameras inside internal network. Operation is as below: 1, Set “WiFi” to “ON (STA)” on menu. 2, Connect camera to Camera Manager program and set WiFi parameter to same as WiFi router (enter WiFi router info and then click “Set”). 3, Go to WiFi router setting to check the body camera IP address distributed by router. (If needed, please check with router vendor on how IP address is distributed).
6. Camera setting through Camera Manager The device setting can be changed in the menu or via Camera Manager (Please find it in BodyCam PC Software file). Please check page 3 to get access to it. Please refer to the steps below when do the device setting via Camera Manager. A. Copy BodyCam PC Software file on windows system computer and find Camera Manager. B. Choose “Password On” in the menu of the device. C. Install the driver (Read the instruction in BodyCam PC Software file to install it).
D. Connect the device to PC. E. Open Camera Manager and enter password 000000, connect and login. F. Click “Get” to show up the device’s original settings. Choose the target setting and click “Set” to change the setting. G. Click “Enter U Disk” (in the upper right corner) to make the device to be recognized by PC as U Disk. All files can be checked in U Disk.
IMPORTANT INFORMATION The clips and attachment studs rotate 360 degrees The crocodile clip, epaulette clip, chest harness and shoulder harness attachment studs ALL turn 360 degrees. Slot the clip into the back of the camera then turn the clip vertically. Or you can slot the clips into the back of the body camera first, then attach the body camera to the chest or shoulder harness, then turn the body camera vertically. Reset deviceTo reset the device, use a small needle to jab the reset button.
FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
