Product Specs

Model: M16
Contains F
CC ID：2AUPL-M16
The host OEM user manual must also contain clear instructions on how end users canfind and/or access
the module and the FCC ID and ISED.
Model: M16
Contains FCC ID：2AUPL-M16
OEM Statement:
a. The module manufacturer must show how compliance can be demonstrated only for a
specific host or hosts
b. The module manufacturer must limit the applicable operating conditions in which the
transmitter will be used, and
c. The module manufacturer must disclose that only the module grantee can make the
test evaluation that the module is compliant in the host. When the module grantee either
refuses to make this evaluation, or does not think it is necessary, the module certification
is rendered invalid for use in the host, and the host manufacturer has no choice other
than to use a different module, or take responsibility (§ 2.929) and obtain a new FCC ID
for the product.
d. The module manufacturer must provide the host manufacturer with the following
requirements:
i. The host manufacturer is responsible for additional testing to verify compliance as a
composite system. When testing the host device for compliance with Part 15 Subpart B,
the host manufacturer is required to show compliance with Part 15 Subpart B while the
transmitter module(s) are installed and operating. The modules should be transmitting
and the evaluation should confirm that the module’s intentional emissions are compliant
(i.e. fundamental and out of band emissions).