Product Specs

WiFi AP Module Product Specification

Model Name.: M31

5 Interfaces

USB

The USB2.0 interface support USB slave devices, such as USB storage device, USB 3G/4G dongle,

USB camera, etc.

UART

The UART default baud rate is 115200bps.

GPIO

The GPIO Support 2.5/3.0/3.3V Voltage.

WAN/LAN

The M

31 module integrates 5-port 10/100Mbps fast Ethernet switch.

ANT

The antenna is Ipex antenna, and is permanent connection antenna. the antenna is 2.0dBi,This

antenna is permanently paired with a product to sell. ( Only antennas of the same type and with

equal or less gains as shown below may be used with the The WiFi AP module. Other types of

antennas and/or higher gain antennas may require additional uthorization for operation)

Module operation instructions

1. the module button on the antenna, according to the following requirements of the power supply,

power up, this time the red LED often bright, about 3 seconds to wait about seconds to complete the

initial。

2. Iphone/Android mobile phone WIFI function to open, search to the corresponding WIFI AP module

name (name can be changed according to customer production requirements), click the name of the

WIFI and select the connection.

3. open application software (need to install the company's specific application software

development, application software interface can be customized according to customer's product

requirements), click on the interface to see the scene。