Operating Description

6 Page / 16 Pages
No.
LED Screen Displays
Function Profile
1
Input Power
Display input wattage
2
Cooling System Display
Display cooling system operation
3
Output Power
Display output wattage
4/5
Hertz Display
50Hz（Click“POWER”Switch +AC Switch 3 seconds to Swtic
h Frenquency autermatic）
6
Wireless Charge Display
Display the status of wireless charging
7
Battery Percentage
100% battery input
8
Alarm Display
Disply the malfunction and lightflash warning
9
Power Input Display
Flashing while power charging
10
DC ON/OFF Display
Display the status of DC switch operation
11
USB ON/OFF Display
Display the status of USB port operation
12
AC ON/OFF Display
Display the status of AC switch operation
三、 Function Operating Description
1. Product charging
1) Plug the power cord into the AC charging input port of the host power supply, or connect the solar pa
nel to the XT60 port, and the display panel will blink incrementally from left to right. When all the 10 pan
els are on and the battery percentage is 100%, it means that the product is fully charged.
2) When charging, pay attention to the power supply voltage must be the same as the required input vol
tage, otherwise it will cause overvoltage protection or mains trip.
2. Ac discharge
1) Click the "POWER" button for 1S, and the screen lights up. Click the AC button, and the screen displa
ys AC. At this time, insert the load line arbitrarily into the AC/110V output port (6), and the device can b
e used normally.
2) Note: Please do not exceed the maximum output power of the machine 1200W. If the load exceeds 1
200W, the power supply will enter the protection state and cannot output, and the buzzer alarm will be i
ssued, and the alarm symbol will appear on the display screen. At this time, the load device needs to be