User's Manual

Package includes
Bluetooth speaker
USER MANUAL
EBT002
1. Introduction
2. Packaging Includes / Conncection Diagram
3. How to use
4. Pairing
5. Charging
6. Technical Specifications
• Wireless Speaker
• Micro USB ChargingCable
• 3.5mm Aux-in Cable
• User Manual
1. Switch On / Off (long press)
2. Last song / Lower sound when long press
3. Phone call
4. Pause / Play press twice to start a call /
Press once to answer a call
Long press to cancel BT pairing.
5. Next song / Louder sound when long press
Pairing to Mobile phone
Charging your speaker
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found
to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses,
and can radiate radio frequency energy and,
if not installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged
to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment
and receiver.
- Connect the equipment to an outlet on a circuit
Different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV
technician for help.
Bluetooth® wireless technology streams
audio from all your devices.
The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc and any use of such
marks by Orbit Innovations is under
license. Other trademarks and trade
names are those of their respective
owners.
To use your wireless speaker, you must
first pair your speaker with a phone.
Once your Bluetooth
speaker is paired to a specific
mobile phone, they will remain paired
and automatically recongnize each
other whenever they are within range.
Pairing to a phone:
The speaker is convenient to connect to a
USB charger via its Micro-USB port.
Make sure that your speaker is fully charged
for at least 6 hours before initial use.
Insert one terminal of your charger to the
USB port of your PC and the other terminal
to the Micro-USB port. While charging, the
red LED light is constantly on. When
charging is completed, the LED turns off.
Bluetooth speaker
Model:EBT002
Bluetooth Version:5.0
Charging:DC 5V
Material:ABS
Size:70*70*40mm
Speaker Driver:45mm plus 4Q/3W
Working distance:Max 10 meter
Frequency Response:100 Hz-18 KHz
Battery:400mah lithium-ion Battery
Normal Volume Playing Time:1.5-2.5H
Built-in Mic for hands-free calling
Shezhen EPT Electronic Technology Co.,Ltd.
Room 305-306,QianXi Building B, Changken,
Bantian Town, Longgang District, Shenzhen,China.
• Turn on your phone and ensure its
Bluetooth function is activated.
• Turn the speaker on and it will go
into pairing mode.
• Search your Bluetooth devices on your
phone by following the phone’s instructions.
• After a few seconds the phone will list
“OR1044BT” as a discovered device. Select it
and follow your phone’s instruction to pair.
You must select a qualified charger from a
reliable source.
You must charge the Bluetooth speaker if it has
not been used for more than 12 months.
• Your phone will confirm the pairing, and
then press Yes/Ok.
• Finally, select to connect with “OR1044BT”
from your phone.
8
Desired Result
Required Action
Turn on & Enter
the pairing mode
Switch On / Off (long press)
Pairing
You should use a Bluetooth function mobile
phone or other Bluetooth Master Device and
to perform pairing action (detail refer to the
chapter about pairing)
Next
Previous
Press is for next music.
Press is for previous music.
Volume up Long press the for volume up.
Volume down
Long press the for volume down.
Charging
Plug the charger to micro-USB port
at the back of the device.
(Red LED is on)
Phone Call
Press to answer calls.
Play / Pause
Press twice to start a call /
Press once to answer a call
Long press to cancel BT pairing.