User's Manual

10
True RMS Digital Multimeter User Manual
5. Measure Function
5-1. AC Voltage Measurements
WARNING:
CAUTION:
ON or OFF.
VAC
COM
V
Risk of Electrocution. The probe tips may not be long enough to
contact the live parts inside some 240V outlets for appliances
because the contacts are recessed deep in the outlets. As a
result, the reading may show 0 volts when the outlet actually has
voltage on it. Make sure the probe tips are touching the metal
contacts inside the outlet before assuming that no voltage is
present.
Do not measure AC voltages if a motor on the circuit is being
switched Large voltage surges may occur that can
damage the meter.
1.Set the function switch to the position.
2.Insert the black test lead banana plug into the
negative jack. Insert red test lead banana
plug into the positive jack.
3.Read the voltage in the main display
2.
2.
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
CAUTION:
CAUTION:
Bluetooth
20Afo r
30sec
MAX
every
15min
TEMP
CAP
F1
HOLD
REL
RANGE
4~20
%
TEMP
°C
°
F
RANGE SETUP SAVE HOLD
Auto range 00:00
True RMS Multimeter
12 00. 0
V~
0
1
2
3
4
5V~
F2 F3 F4
10A
800mA