User's Manual

17
True RMS Digital Multimeter User Manual
5-12. AC Current Measurements
CAUTION:
COM
μA
μA/mA
mA
μA/mA
10A
MODE
5-13. % 4 – 20mA MEASUREMENTS
4-20mA%
Do not make 10A current measurements for longer than 30
seconds.
Exceeding 30 seconds may cause damage to the meter and/or the test leads.
1.Insert the black test lead banana plug into the
negative jack.
2.For current measurements up to 5000μA AC,set
the function switch to the position and
insert the red test lead banana plug into the
jack.
3.For current measurements up to 500mA AC,set
the function switch to the position
and insert the red test lead banana plug into the
jack.
4.For current measurements up to 10A AC,set the
function switch to the position and
insert the red test lead banana plug into the 10A
jack.
5.Press the button to indicate “AC” on
the display.
6.Read the current in the display.
1.Set up and connect as described for DC mA measurements.
2.Set the rotary function switch to the position.
3.The meter will display loop current as a % with 0mA=-25%, 4mA=0%, 20mA=100%,
and 24mA=125%.
1.
1.
1.
1.
1.
1.
1.
1.
1.
1.
5.
3.
CAUTION:
Bluetooth
20Afo r
30sec
MAX
every
15min
TEMP
CAP
4~20
%
TEMP
°C
°
F
RANGE SETUP SAVE HOLD
Auto range 00:00
True RMS Multimeter
100. 00
A
0
1
2
3
4
5A
F1
HOLD
REL
RANGE
F2 F3 F4
10A
800mA