User's Manual

23
True RMS Digital Multimeter User Manual
Press the + soft key to increase Graph
resolution. Press the >> soft keys to move
cursor.
Viewing data stored in the Meter’s memory
is performed through the menu. Press the
softkey labeled . Position the menu
selector next to the menu item labeled
and pressing the softkey labeled
Viewing data stored in the Meter’s memory
is performed through the menu. Press the
softkey labeled . Position the menu
selector next to the menu item labeled
and pressing the softkey labeled
The Meter’s setup options can be reset to default values through the setup menu.
Open the setup menu. Position the menu selector next to the menu item labeled
and press the key . Then Position the menu selector next to the menu
item labeled SETUP and press the key . Then A message will appear asking to
confirm the reset action. Press the softkey labeled OK to perform the reset.
6-12. Info
save
DOWN (F3)
INFO
ENTER(F1)
save
DOWN (F3)
SETUP
ENTER(F1)
7-1. Resetting Meter
RESET Enter
OK
7. Setup Options
331.99 Mv 08:26:25pm
Auto range 08:27pm
DELETE BACK
+
»
400
320
240
160
80
0.0
00:00 00:10 00:20 00:30 00:40
06/02/14 08:26:09pm
Auto range
08:20pm
UP DOWN CLOSE
Fno. Graph- According to graphically display
measurement information
Fno. Mode-Releted to the rotary switch
function.
Fno. Save- Accesses the memory management
menu for saving measurement, setting
up recording sessions, or viewing and
deleting stored measurements from memory.
Fno.
Fno.
Fno.
Fno.
Fno.