User's Manual

26
True RMS Digital Multimeter User Manual
7- .
7-
10 Replacing the Batteries
11 Replacing the Fuses
Refer to Figure and replace the batteries as follows:
1.Turn the Meter off and remove the test leads from the terminals.
2.Remove the battery door assembly by using a standardblade screwdriver to turn
the battery door screw one-half turn counterclockwise.
3. Replace the batteries with 7.4 volt charge batteries Observe proper polarity.
4. Reinstall the battery door assembly and secure it by turning the screw one-half
turn clockwise.
Referring to Figure , examine or replace the Meter's fuses as follows:
1.Turn the Meter off and remove the test leads from the
terminals.
2.Remove the battery door assembly by using a standardblade screwdriver to turn
the battery door screw one-half turn counterclockwise.
3.Remove the fuse by gently prying one end loose, then
sliding the fuse out of its bracket.
4.Install only specified replacement fuses.
5.Reinstall the battery door assembly and secure it by turning the screw one-half
turn clockwise
.
2.
2.
2.
2.