User's Manual
THERMOCOUPLE TEMPERATURE MEASUREMENTS
1. Rotate the function switch to the TYPE K position.
2. Insert the Temperature Probe into the input jacks, making sure to observe the
correct polarity.
3. Press the MODE button to indicate “ºF” or “ºC”
4. Touch the Temperature Probe head to the part whose temperature you wish
to measure. Keep the probe touching the part under test until the reading
stabilizes.
5. Read the temperature in the display.
Note: The temperature probe is fitted with a type K mini connector.
A mini connector to banana connector adaptor is supplied for connection to
the input banana jacks.
Note: The temperature range of the supplied thermocouple probe is -20 to 250°C (-4 to 482°F)
CAPACITANCE MEASUREMENTS
WARNING: To avoid electric shock, disconnect power to the unit under test and discharge all capacitors before
taking any capacitance measurements. Remove the batteries and unplug the line cords.
1. Rotate the function switch to the CAP position.
2. Insert the black test lead banana plug into the negative COM jack.
Insert the red test lead banana plug into the positive V jack.
3. Touch the test leads to the capacitor to be tested.
4. Read the capacitance value in the display
FREQUENCY(DUTYCYCLE)MEASUREMENTS
1. RotatetthefunctionswitchtotheHz/%position.
2. InserttheblackleadbananaplugintothenegativeCOMjackandthered
testleadbananaplugintothepositiveHzjack.
3. Touc hthetestprobetipstothecircuitunder
test.
4. Readthefrequencyonthedisplay.
5. PresstheMODEbuttontoindicate“%”.
6. Readthe%dutycycleinthedisplay.