User's Manual

10. Maintenance
1) Probe, the most intricate part, must be kept clean and intact.
2) Clean the device with a soft dry cloth moistened with moderate
amount of alcohol.
3) Do not use corrosive cleaner and do not immerse the device into water
or other fluid.
4) Keep the device in cool and dry place
11. Environmental Protection
1) Do not dispose the device and its accessories as common living
garbage.
2) Please observe local statutes about the disposal of the device and its
accessories, and support recycle.
12. Use of Battery
Red LED lights will flash continuously and go out when press the button
on device if battery power is low. Please change a new 3V (CR2032)
battery.
LED will not light up when press the button if battery power runs out.
Please change a new battery.
1) Turn on battery cover (or with a coin), and change battery.
2) Remove battery from the device if it is not going to be used for a long