User's Manual

High Noise Reduction

This function will effective reduce the noise under the high

noise conduction.

The noise reduction reach 25dB and makes voice will be clear.

This function are available for your setting through the

Programmable key and radio Menu.

Note: This feature default off .If this feature is enabled ,

your speaking volume will be low. After this feature is enabled,

you need speak near the MIC.

Time- out Timer(TOT)

The purpose of TOT is to prevent any user from

occupying a channel for an extended period.You can set

the longest time of single pressing PTT.If the preset time

expires ,the radio will terminate transmission automatically .

This feature can be enabled via the programming software

Setting.

GPS Positioning

You are available to set the keys P1,P2,P3,P4,Up,Downand

TK key as the shortcuts,such as High Power and Low Power

switching and Zone Up and Zone Down, Squelch and Scan .

This function only via the programming software setting.

This function helps to get and upload the radio GPS

positioning data(As shown).

Press Setting Key ,to go to "Radio Information”-"Positioning

System”- “Positioning System On/Off”to turn On/Off GPS

function. After GPS turn on,the radio status Positioning

icon will display.If the GPS locate successfully ,the icon

change to from .

Review the GPS Positioning data from the “Radio

information”- “Positioning System”- “Radio Positioning Information”.

Programming Key

Product Functions and Operations