User's Manual

MPT-DMR Call
Base on the appropriate MPT-DMR Group Call number
configurated by base station ,you can achieve MPT trunking radio
cal DMR trunking mode radio each other.
In MPT trunking mode ,you may transmit a MPT-DMR Call
through any of the following methods.
1,Transmitting a call to the preset contacts.
2,Transmitting a call through Group Contacts .
3,Through manual input.(Specific operation is the same as
group call)
Receiving and Responding to a Call
In DMR trunking mode ,When a group call /private call
is received , your radio set up calling automatically and
a alert ton“De” sounds.
The group alias or ID mumber will display on the first line
of screen and private calling group name or private ID
number will display on the last line. .
Late Access
After setting up group call,this radio allows the member
haven’t joined in this group transmit this call during calling .
MPT Trunking Functions and Operations
Note: In DMR Trunking mode ,your radio must wait to
the corresponding group.
(No need wait in this group when the DMR corresponding
group is the responsing group ).
MPT trunking radio transmit a MPT-DMR call
DMR trucking mode radio initiate a call to DMR-MPT is the
same as the above operations.
Emergency Caution
Setting a Private Call, Group Call or Dispatch Station
Call number via CPS setting ,press the Emergency Caution
Key on the microphone or the front panel of radio for 3
seconds to initiate a Emergency Call.
31