User's Manual

1514
SUMMARY
NOTE: If all LED lights have set off) then the screen will not light up when power on. The
transceiver sounds beep to indicate radio is successfully powered on. If the user disable volume/voice
prompt function) no voice for power on.
Power on the radio
Adjust Volume
Turn on the radio by turning the Volume switch clockwise till a “click” is heard, and you will hear a
Power up beep if the dealer has set it. Then the screen displays DMR and the radio name you have
edited. LED lights green, if the backlight have been set auto open, then the screen lights up.
Rotate the Power/Volume knob to adjust the volume. Turn clockwise to increase the volume and
counterclockwise to decrease the volume.
BASIC OPERATIONS
Receiving or Making a Call
A zone is a group of channels. Your radio supports up to 250 zones, with a maximum of 16 channels
per zone. This transceiver has 1000 channels by software. Use the following procedure
to select a zone.
Once the required zone is displayed, if you have multiple zones in your radio, turn the
channel selector knob to select the channel, subscriber alias or ID,or group alias or ID.
To receive a call from a group of users, your radio must be congured as member of that group.
1.Selecting a Zone
2.Selecting a Radio Channel, Subscriber lD, or Group ID
3.Receiving and Responding to a Group Call
1. Press [
MENU
]
to access menu mode.
2. Press [
/
] to zone, then press [
MENU
]
to select.
3. The current zone is displayed the name of the zone.
4. Press [
/
] to the required zone and press [
MENU
]
key to select.
5. The display shows <Zone> Selected momentarily, then back to the zone.
Zone
Zone1
Procedure:
When you receive a Group Call (while in the home screen);
1. The green LED lights.
2. The rst line of the display shows the caller alias and the RSSI icon. The second line displays the