User's Manual

4140
FUNCTION MENU SETUP
Radio Enable
Scan Lists
5. The display shows Radio Disable: <Subscriber Alias or ID> and the LED turns red.
6. If successful, a tone sounds and the display shows Radio Disable Successful. Or if not
successful, a tone sounds and the display shows Radio Disable Failed. When disabling the radio,
do not press [
B A
C
K
]
, because you will not get the acknowledge info.
Procedure:
1. Press [
MENU
] to access menu.
2. Press [
/ ]
to Contacts and press [
MENU
] to select.
3. Press [ / ]
to the required alias or ID and press [
MENU
] to select. Or press [ / ]
to
Manual Dial and press [
MENU
] twice to select. Input the subscriber alias or ID and press [
MENU
] .
4. Press [
/ ]
to Radio Enable and press [
MENU
] to select.
5. The display shows Radio Enable: <Subscriber Alias or ID>.
6. If successful, a tone sounds and the display shows Radio Enable Successful. Or if not successful,
a tone sounds and the display shows Radio Enable Failed. When enabling the radio, do not press
[
B A
C
K
]
, because you will not get the acknowledge info.
Scan lists are created and assigned to individual channels/groups. Your radio can support up to
250 scan lists, with a maximum of 16 members in a list. Each scan list supports a mixture of both
analog and digital entries. You can add, delete, or prioritize channels by editing a scan list.
Call 1
Radio Enable:
FUNCTION MENU SETUP
View the scan list
Scan instructions
1. Select a channel with scan list by channel selector knob;
2. Press [
/ ]
to access the menu.
3. Press [
/ ]
to Scan and press [
MENU
] to select.
4. Press [ / ]
to View List and press [
MENU
] to select.
5. Press [ / ]
to view each member in the list.
If you set priority scan, the priority icon will appear on the left of the member alias, meaning this
member is priority channel 1 or 2.
In the scan list, you can only have one priority channel 1 or
priority channel 2.
If non priority scan, then will not show the priority icon.
When you start a scan, your radio cycles through the scan list looking for voice activity.
The LED blinks red , and scan icon shows in the screen while in scan mode.
There are two ways of initiating scan:
● Manual Dial (Manual): Your radio scans all the channels/groups in your scan list. On entering
scan, you may use, depending on the settings, the can on/off button or by the
menu function to start scan.
● Auto Scan (Automatic): Your radio automatically starts scanning when you select a channel/group
that has Auto Scan enabled.