User's Manual
4342
FUNCTION MENU SETUP
Starting and Stopping Scan
Responding to a Transmission During a Scan
Press the Scan button or follow the scan menu.
1. Use the Channel Selector Knob to select a channel with a scan list.
2. Press [
MENU
] to access the menu.
3. Press [
/ ]
to Scan and press [
MENU
] to select.
4. The display shows Turn Off if scan is disabled. Or the display shows Turn On if scan is enabled.
5. Press [
MENU
] to select.
6. The LED blinks red and shows scan icon when Scan is enabled. Or the LED turns off and without
scan icon when Scan is disabled.
During scanning, your radio stops on a channel/group where activity is detected. The radio stays
on that channel for a time period known as "hang time".
Procedure:
1. Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. If digital channel and
the Channel Free Indication feature is enabled, you will hear a short alert tone the moment the
transmitting radio releases the [PTT] button, indicating the channe is free for you to respond.
2. Press the [PTT] button during hang time. The red LED turns on.
3. Release the [PTT] button to listen.
4. If you do not respond within the hang time, the radio returns to scanning other channels/groups.
Locking and Unlocking the Keypad
Turning Keypad Tones On or Off
You can lock your radio's keypad to avoid inadvertent key entry.
Procedure:
1. Press [
MENU
] to access menu.
2. Press [
/ ]
to Utilities and press [
MENU
] to select.
3. Press [ / ]
to Radio Settings and press [
MENU
] to select.
4. Press [ / ]
to Keypad Lock and press [
MENU
] to select.
5. The display shows Keypad Locked and returns to the Home screen.
6. To unlock the keypad, press [
MENU
], then press [
E
L
D
] .
7. The display shows Keypad Unlocked and returns to the Home screen.
You can enable and disable keypad tones if needed.
Procedure:
1. Press [
MENU
] to access menu.
2. Press [ /
]
to Utilities and press [
MENU
] to select.
3. Press [ /
]
to Radio Settings and press [
MENU
] to select.
4. Press [ /
]
to Tones/Alerts and press [
MENU
] to select.
5. Press [ /
]
to Keypad Tones and press [
MENU
] to select.
ADVANCED OPERATIONS