User's Manual

4948
Turning the Introduction Screen On or Off
Accessing General Radio Information
5. The display shows Turn On. Press [
MENU
] to enable the LED Indicator. The display shows All
LEDs On.
Or the display shows Turn Off. Press [
MENU
] to disable the LED Indicator. The display shows All
LEDs Off. The display backlight, buttons, and keypad backlight are automatically turned off if the
LED indicator is disabled.
You can enable or disable the Introduction Screen if needed.
Procedure:
1. Press [
MENU
] to access menu.
2. Press [
/ ]
to Utilities and press [
MENU
] to select.
3. Press [ / ]
to Radio Settings and press [
MENU
] to select.
4. Press [
MENU
] to Intro Screen and press [
MENU
] to select.
5. The display shows Turn On. Press [
MENU
] to enable the Introduction Screen. The display shows
Intro Screen On. Or the display shows Turn Off. Press [
MENU
] to disable the Introduction Screen.
The display shows Introduction Screen Off.
Your radio contains information on the following:
Radio ID
Software Version
Codeplug Version
ADVANCED OPERATIONS
NOTE: Press
[
B
A
C
K
]
at anytime to back to priority screen.
Check radio ID
Check Software Version
Check Codeplug Version
1. Press [
MENU
] to access menu.
2. Press [
/ ]
to Utilities and press [
MENU
] to select.
3. Press [ / ]
to Radio info, then press [
MENU
] to select.
4. Press [ / ]
to Self Number and press [
MENU
] to select.
5. Screen shows radio alias and ID.
Display radio software version
1. Press [
MENU
] to access menu.
2. Press [
/ ]
to Utilities and press [
MENU
] to select.
3. Press [
/ ]
to Radio info, then press [
MENU
] to select.
4. Press [ / ]
to Software version and press [
MENU
] to select.
5. Screen shows current software version.
Display radio Codeplug version.
1. Press [
MENU
] to access menu.
ADVANCED OPERATIONS