User's Manual

11
Basic Operations
■
Switching the Channel Mode
This radio can operate in either digital or analog
conventional mode.
Each channel can be programmed as either analog or
digital channel via the CPS. If the current zone includes
a mixture of analog and digital channels, you may
quickly switch between digital and analog through the
Channel Selector knob.
■
Setting the Programmable Buttons
You may set the programmable buttons (SK1, SK2, and
TK) as shortcuts to radio functions (such as power level
switch, zone switch, or squelch level) using the CPS.
■
Adjusting the Volume
After turning the radio on or during a call, rotate the
Radio On-Off/Volume Control knob clockwise to
increase the call volume, or counterclockwise to
decrease it.
■
Adjusting Power Level
With this option, you may toggle power levels quickly.
We recommend you to adopt low power for battery
■
Selecting a Channel
After turning the radio on, rotate the Channel Selector
knob to select a desired channel. In the process, you
will hear the sequence number of the selected channel
in the Zone Member list.
■
Selecting a Zone
A zone is a group of channels exhibiting the same
property. The radio supports 32 zones and each zone
contains 16 channels at most.
You may quickly toggle to your desired zone by
pressing the programmed Zone Up or Zone Down key.
■
Transmit Time-Out
The purpose of Transmit Time-Out is to prevent any
user from occupying a channel for an extended period.
If the preset time expires, the radio will automatically
terminate the transmission.
You may set the time via the CPS.
saving. However, if you cannot communicate with
radios located at a distant place with low power, please
select high power.