User's Manual

USER MANUAL

Wireless Mouse Features:

Wired and 2.4G wireless dual mode with USB+TYPE-C paracord cable

Best ergonomic design for long comfortable play in gaming

Best Grip for every style play

RGB led turn on/off function with switch and software

Easy and quick DPI change with DPI button on top

Sensor: PMW3335

Custom software

Polling Rate:125-250-500-1000Hz

300mA rechargeable lithium battery

Type-C Wired connection and charging

Charging indication in the wheel

Low Packet Loss Rate in a variety of operating environments

Zero delay with 1000Hz polling rate(1MS response time)

Low power consumption with 3 levels power management

Software synchronous for both USB wired and 2.4G wireless

Auto-detaction between wired and wireless

Size:120x66x42mm

Weight:94g with battery

Mouse installation

1.Take out the wireless USB Nano receiver from bottom of the mouse

2.Plug the receiver into your computer USB port

3.Turn on the mouse power by switching the power switch on the bottom of the

mouse

4.Waiting for computer installation finished

DPI setting and indication

1.DPI level: 400-800-1200-2400-3200-6400,total 6 levels DPI

2.By pressing the DPI button on the top of mouse to change DPI circularly

3. The mouse wheel led color will indicate the DPI level as below:

400DPI:Red color breath, 800DPI(default):blue color breath, 1200DPI:green

color breath

2400DPI:Yellow color breath, 3200DPI:Cyan color breath, 6400DPI:Purple color

breath

Note:

1.DPI can be set by software , MAX DPI is 16000dpi

2.DPI led effects can be set by software and can turn off the DPI led to save power

Polling rate:

125-250-500-1000Hz can be set by software, default polling rate is 500Hz

PAGE 1
USER MANUAL Wireless Mouse Features: Wired and 2.
PAGE 2
Power switch instruction Note: 1.Switch at LED off place: turn on the mouse power, but RGB led is off 2.Switch at power off place: turn off the mouse power 3.Switch at led on place: turn on the mouse power and RGB led 4.If you switch from power on to RGB led on directly, you need stop at power off place for at least 1 second to make sure the LED can be turned on properly 5.
PAGE 3
Battery: 1. IM07DM(bigger version): Non-detachable rechargeable lithium battery(800mA) RGB led setting and working Default RGB effect is RGB flowing effect You can set different RGB effect by software(total 4 effects) and 16.8 million colors When you turn on the LED, the RGB led will turn off automatically while using the mouse, and LED will turn on after stop using the mouse Note: 1 .