Users Manual

Mouse instruction:
Mouse installation
1.Take out the wireless USB Nano receiver from bottom of the mouse
2.Plug the receiver into your computer USB port
3.Turn on the mouse power by switching the power switch on the bottom of the
mouse
4.Waiting for computer installation finished
DPI setting and indication
1.DPI level: 400-800-1200-2400-3200-6400,total 6 levels DPI
2.By pressing the DPI button on the top of mouse to change DPI circularly
3. The mouse wheel led color will indicate the DPI level as below:
400DPI:Red color breath, 800DPI(default):blue color breath, 1200DPI:green
color breath
2400DPI:Yellow color breath, 3200DPI:Cyan color breath, 6400DPI:Purple color
breath
Note:
1.DPI can be set by software , MAX DPI is 16000dpi
2.DPI led effects can be set by software and can turn off the DPI led to save power
Polling rate:
125-250-500-1000Hz can be set by software, default polling rate is 500Hz
Power switch instruction