User's Manual

FCAR Product Manual
6
1.3 Care and Maintenance
1.3.1 Storage Environment
1) Store the product in a flat and dry place with suitable temperature.
2) Never put the product in direct sunlight or near to any heat source.
3) Never put the product in a magnetic field.
4) Avoid smoke erosion, and water or oil splashing.
5) Avoid shock, dust, moisture and extremely high temperature.
6) If main unit is dirty, power off the machine, then clean the housing case with a soft cloth.
7) Periodically start up the FCAR main unit to avoid moisture accumulation if it is not in use for
a long period of time.
1.3.2 Main Unit Protection
1) Handle it with care and avoid impact.
2) Be careful when plugging and unplugging the main cable and diagnostic connector. Tighten
the screw before operation to avoid unexpected disconnection and/or damage to the diagnostic
port.
3) Return the test cable, connectors and other accessories to the box to avoid loss.
1.3.3 Touch screen Care
1) Dust may accumulate on the LCD screen due to electrostatic attraction. It is suggested to
buy a special LCD screen wiper to clean the screen gently;
2) Avoid touching the screen with bare hands to avoid fingerprint deposition. Never use
chemicals to clean the screen.
3) Never put the FCAR product close to any electromagnetic wave products to avoid any
harmful effect on the screen.
4) Never put the FCAR product in direct sunlight or ultraviolet radiation for any length of time
to avoid shortening the service life of the screen.
1.3.4 Precaution on operation
1) Do not switch the main unit on and off frequently or cut off the power suddenly, as power
supply instability and abnormal power supply may result.
2) Unplug the power after usage to slow down aging of the product.
3) Avoid using this product in an environment with air which has volatile alkali chemical, so as
to avoid host hardware corrosion.
4) Never clean the product with chemical solvent reagents like banana water, engine cleaning
agents, gasoline etc.
5) Don’t put anything on the screen. To avoid any damage, please don’t place objects on the