User's Guide

ManualsBrandsShenzhen Feelstorm Technology ManualsBaby MonitorsDigital Video Baby Monitor

3. Using the Baby Monitor VB601

3.1 Setting up

 Place the baby unit in a convenient location (e.g. on a

table) and point the camera lens towards the area you

want to monitor. Adjust the baby unit until you are

satisfied with the image in the parent unit.

 To mount the baby unit on the wall, see section “9.

Wall mounting instructions” for more details.

NOTE

Do not place the baby unit within baby’s reach! If there

is interference on the picture or sound, try moving the

units to different locations, and ensure they are not

close to other electrical equipment.

3.2 Pairing camera

The enclosed baby unit has already been registered , You

do not need to register it again unless the baby unit loses its

link with the parent unit. See section “5.2 Camera

Registration” for more details.

3.3 Night vision

The baby unit has 8 high-intensity infrared LEDs for picking

up clear images in the dark.

3.4 music player

Press and hold key at least 3 seconds will turn on

the music player and play lullaby through the baby unit;

long press the key 3 seconds again will turn off it.

3.5 Talk function

Press and hold key on the parent unit to talk to your

baby through the baby unit loudspeaker. The symbol will be

displayed at the bottom of the screen.

3.6 Adjusting the volume

When the video is playing mode, press key to

decrease volume or key to increase volume. The

display will show the current volume for 5 seconds.

3.7 Reset the parent unit

Press and hold key at least 8 seconds, the parent

unit will be forced to restart.

4. Monitoring Screen Icons

1. Signal strength indicator

2. Temperature of the baby’s room

3. Lullaby is playing

4. Alarm activated

5. Battery indicator

6. PTT function activated

7. Date and time ( DD/MM HH:MM AM/PM)

5. Menu Options

5.1 Main menu

Press “Menu” key at monitoring screen will enter the

main menu, It contains 4 items :

1. Camera

2. Alarm

3. Settings

4. System info

You can press the “Up” key or “Down” key to move the

cursor to select an item and press “Menu” key will enter

the sub-menu which you selected.

Press “Return” key will back to monitoring screen

5.2 Camera Registration

Press “menu” key to entry registering screen, then

push the pair key on the back of baby unit within 10

seconds.

5.3 Alarm

Press “Down” key to choose item, ”PTT” key to move

the cursor and “Up” key to change

value .

5.4 Settings

5.4.1 Language

Language setting menu allows you to choose your

language from the following :

English / French / Spanish / Portuguese / Italian /

German / Turkey

5.4.2 Time and date

There are contains 2 items in this menu

 Set time / date

 Set format

Press “Down” key to choose item, ”PTT” key to move

the cursor and “Up” key to change value .

5.4.3 Temperature unit

Switch the unit to Celsius or Fahrenheit

5.4.4 Anti-flicker

You are able to adjust the frequency of 50 / 60 HZ to

suit your lighting for anti-flicker

5.4.5 System mode

This menu allows you to choose the working mode

from the following: Normal mode / VOX mode

5.4.5 VOX Sensitivity

Switch the Vox sensitivity at Low / Medium / High level

5.4.7 LCD backlight

You are be able to adjust the brightness of the LCD

you are viewing and the LCD backlight active time in

menu operation.

5.5 System info

There are contains system information such as

software version , hardware version, build date etc.

6. Wall mounting instructions

1. Use the template below to mark the wall in the correct

places to drill holes for wall-mounting screws

2. Insert 4mm head screws (not supplied) into the holes

and tighten the screws. Then, align your baby unit with the

screws and push it down.

3. Point the camera lens towards the area you want to

monitor. Adjust the baby unit until you are satisfied with the

image in the parent unit.