Installation Instructions

VB602-T Circuit Description

This product VB602-T is a baby unit TRANSCEIVER. When

plugging in the POWER SUPPLY, all the circuit will start to work.

The main chip MSF9200 will run the code by 26MHZ OSC, then it

turns on the necessary circuit. Include the RF circuit, speaker and

CAMERA. In this time, the processor works first to build up a

communication chain for another

parent

unit TRANSCEIVER.

When the wireless chain setup successfully, The processor encodes

the moving picture and voice data stream, and send them to parent

unit TRANSCEIVER by the RF circuit. Also, VB602-T can play

music by driving the speaker.

PAGE 1
VB602-T Circuit Description This product VB602-T is a baby unit TRANSCEIVER. When plugging in the POWER SUPPLY, all the circuit will start to work. The main chip MSF9200 will run the code by 26MHZ OSC, then it turns on the necessary circuit. Include the RF circuit, speaker and CAMERA. In this time, the processor works first to build up a communication chain for another parent unit TRANSCEIVER.
PAGE 2
FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, Pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.