Data Sheet

FTY Technology Co.,Ltd
8.4 Moisture sensitivity
The Modules is a Moisture Sensitive Device level 3, in according with standard
IPC/JEDEC J-STD-020, take care all the relatives requirements for using this kind of
components.
Moreover, the customer has to take care of the following conditions:
a) Calculated shelf life in sealed bag: 12 months at <40°C and <90% relative humidity
(RH).
b)Environmental condition during the production: 30°C / 60% RH according to
IPC/JEDEC J-STD-033A paragraph 5.
c) The maximum time between the opening of the sealed bag and the reflow process
must be 168 hours if condition
b) “IPC/JEDEC J-STD-033A paragraph 5.2” is respected
e) Baking is required if conditions b) or c) are not respected
f) Baking is required if the humidity indicator inside the bag indicates 10% RH or
more
g) The module is limited to OEM installation only.
h) The OEM integrator is responsible for ensuring that the end-user has no manual
instruction to remove or install module.
i) This module should be installed and operated with a minimum distance 20cm
between the radiator and your body. OEM integrator shall equipped the antenna to
compliance with antenna requirement part 15.203& 15.204 and must not be co-
located or operating in conjunction with any other antenna or transmitters. And OEM
host shall implement a Class II Permissive Change (C2PC) or a new FCC ID to
demonstrate complied with FCC standard.
j) The OEM integrator is still responsible for testing their end-product for any
additional compliance requirements required with this module installed.
k) This module support 2.4G WLAN 2412-2462MHz which compliance with part
15.247. This module support 2.4G BT 2402-2480MHz which compliance with part
15.249.
l) The final end product must be labelled in a visible area with the following:
“Contains Transmitter Module “2A3AKFTYRM23DSC”