User Manual BTX450 Bluetooth Wireless Speaker 1 year warranty www.kinivo.com Contact: support@kinivo.
Introduction Package Contents Read all safety and operation instructions before installing and using your speakers. l BTX450 Speaker l User Manual l 3.5mm Audio Cable l AC Power Adapter Warning: To reduce the risk of fire or electric shock, do not expose this speaker system to water or moisture. Features Important Safety Instructions l Seamlessly stream music from any Bluetooth (A2DP) capable device l Class-D digital amplifier l Supporting Bluetooth protocol v2.1+EDR and A2DP 1.
For iPad, iPhone, iPod Touch Navigate to Settings > General > Bluetooth (On), then select the BTX450 to pair the speaker. 7. LED Indication Status Powered off Powered on Battery charging (plugged in, powered off) Low battery (not plugged in) For Android smartphones and tablets Navigate to Settings > Wireless & networks > Bluetooth settings while Bluetooth is enabled, then select Scan for devices. Select the BTX450 to pair the speaker.
. Error messages when connecting on Mac OS X Verify that the BTX450 speaker are powered on. If you are still unable to connect, restart the computer and remove the BTX450 from the Bluetooth device list. Try to pair the speaker again. 3. How many Bluetooth connections will the BTX450 speaker remember? The BTX450 will remember up to eight (8) previous Bluetooth connections. When the BTX450 is powered on, it will automatically connect to the last device it was connected to.
Warranty Technical Specifications: Power supply: Output power: Built-in Battery Capacity: Speakers: Impedance: Frequency response: S/N Ratio: Separation: Dimensions: Weight: 1 Year Limited Hardware Warranty. 100-240V, 50/60Hz 2x5W (RMS) 3600 mAh 2 4 ohms 200Hz-20KHz 80dB 55dB 11.9 (W) x 3.2 (D) x 3.2 (H) in 0.
FCC Warning: l This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: l (1) this device may not cause harmful interference, and l (2) this device must accept any interference received, including interference that may cause undesired operation. l Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
