User's Manual

2 3
Thank you for purchasing Sharper Image Stream Portable
Bluetooth
®
Wireless Speaker for smartphones, tablets, notebook
computers and other Bluetooth enabled devices. This product,
along with the entire Sharper Image Electronics lineup, combines
high-tech innovation with design to provide you with years of
dependability and enjoyment.
Getting Started
Unpack the unit carefully. Remove all the accessories from the display carton. Do not
remove any labels or stickers on the rear of the unit and adaptor. Before setting up the
unit, verify that the following accessories are present:
• Instruction manual x 1 • AC power adapter x 1
• Main unit x 1 • 3.5mm audio cable x 1
Power Source
This unit is supplied with an AC adapter; take the following steps to connect the adapter.
1. Connect the DC plug of the AC adapter to the DC socket on the rear of the unit.
2. Plug the AC adapter to the AC outlet (100v – 240VAC 50/60 Hz). Connecting this
system to any other power source may cause damage to the system.
3. To switch the unit off completely, withdraw the AC adapter from the wall outlet and
remove batteries from product.
Battery Operation
• Before installing batteries (not included), ensure that the unit is disconnected from the
main power supply.
• Remove the battery compartment cover on the back of the unit by carefully pushing off
the battery cover.
• Insert 4 AA size batteries(not included), referring to the polarity markings inside the
battery compartment. Never mix old and new batteries.
• Replace the cover.
• For battery operation, switch off the main supply and remove the cable from the power
socket, battery operation will be selected automatically.
Controls
3 42 51
3
1 2
Speaker
Phone Button
Bluetooth
Button
Play/Pause
Button
Volume
Controls
Power
Button
DC IN
AUX IN
Battery
Compartment
3
3
4
5
2
2
1
1
Battery Precautions
• Use only the size and type of batteries specified.
• When installing batteries, observe proper +/- polarities. Incorrect installation of battery
may cause damage to the unit.
• Do not mix different types of batteries together (e.g., alkaline with carbon-zinc or old
batteries with new ones).
• If the unit is not going to be used for a long period of time, remove batteries to prevent
damage due to possible battery leakage.
• Do not dispose of batteries in fire. Batteries may explode or leak.