User's Manual

2.Press the ON/OFF button to turn on the speaker. You will hear a “beep“
sound. The speker body will light up, indicating that it is ready to pair.
3.Follow the instructions of your device to search for the device.
4.The bluetooth pairing name is “BT-SPEKER”.
5. LED lights will flash according to music.
Bluetooth Speaker
YOUR PRODUCT
Thank you for purchasing and using our wireless bluetooth
speaker. This productcan provide high quality listening and
enjoyment for moible phone, computer and multimedia. Before
using this product, carefully read this manual to correctly
manipulate and play its best performance.
PAIRING YOUR PRODUCT
BLUETOOTH SPEAKER X1
Charging Cable X1
User Manual X1
PACKAGE CONTENTS
The battery used in this device may present a risk of fire, explosion or
chemical burn if used incorrectly. Never use or charge the battery if it
appears to be leaking, discolored, deformed, or in any way abnormal.
Never dissasemble the unit or attempt to remove the battery as that
could cause leakage of alkaline solution or other electrolytic substance.
Always confirm that the temperature is 5 degrees Celsius before you
change the battery. Never expose the battery to any liquid. Never
expose the battery to excessive heat such as direct sunlight or fire.
Never use the battery pack in an unventilated vehicle where excessive
internal temperatures may be encountered. Always keep the battery out
of reach of infants and small children.
BATTERY CAUTION
Please do not attempt to change the battery yourself. If the battery has
died and you do not want us to replace your battery, you should follow
the disposal instructions listed here. Never dispose of used batteries/
electronics with ordinary solid wastes. Always dispose of used batteries/
electronics in accordance with the prevailing community regulations
that apply to the disposal of batteries/electronics. If there are no local
BATTERY DISPOSAL
INSTRUCTIONS
LIMITED LIFETIME WARRANTY
SPECIFICATIONS
Wireless Versions / Wireless Distance 5.0+ EDR / up to 10 metres
Output Power / Horn Type 1 x 3 Watts / 4Ω 40mm
Unit Size 80.5*80.5*132mm
Power Input DC 5V (1.0A)
Charging Time About 1 hours
Play Time Up to 2-3hours
Built-in Rechargeable Battery 3.7V / 400Mah
Wireless Play / LED
Multiple Functions
Please ensure that your device(Mobile Phone, Tablet or other devices)
is paired with the Wireless Speaker to stream music wirelessly. Once it
is paired, play music from your device.
Our product is warranted for a limited lifetime warranty from the date
of purchase.The warranty is provided on all material defects and
workmanship.Guarentee of 24 months does not apply to decrease in
the accumulators effective capacity caused by its use or age. Effective
capactity gradually decreases depending on the method of use of the
accumulator. WE RESERVE THE RIGHT TO CHANGE TECHNICAL
SPECIFICATIONS.
1.Place device within 10 m of bluetooth enabled device.
regulations concerning batteries/electronics disposal, please dipose
of the device in a waste bin for electronic devices. Many electronics
retailers now recycle batteries and other electronic components at
no charge.
Tip: Must choose the formal manufacturer certified charger, output
voltage of 5v. If the product is not in use for long time, please charge it.
Enabled devices
USER
MANUAL
For use with
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the
following measures:
‐‐ Reorient or relocate the receiving antenna.
‐‐ Increase the separation between the equipment and receiver.
‐‐Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
‐‐ Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
The device has been evaluated to meet general RF exposure requirement.