User's Guide

Page 4
 Use a screw or nail to affix the remote sensor to the wall, as shown in Figure 5 (a) or
 Hang the sensor using a string or zip tie, as shown in Figure 5 (b).
(a)
(b)
Figure 5
Note: Make sure the sensor is mounted vertically and not lying down on a flat surface. This will
insure optimum reception. Wireless signals are impacted by distance, interference (other weather
stations, wireless phones, wireless routers, TVs and computer monitors), and transmission barriers,
such as walls. In general, wireless signals will not penetrate solid metal and earth (down a hill, for
example).
The following is a table of reception loss vs. the transmission medium. Each “wall” or obstruction
decreases the transmission range by the factor shown below.
Medium
RF Signal Strength Reduction
Glass (untreated)
5-15%
Plastics
10-15%
Wood
10-40%
Brick
10-40%
Concrete
40-80%
Metal
90-100%
6. Console
The temperature will be displayed in the indoor / 8-channel section of the display, as shown in Figure
6.