User's Manual

3
4 U-Disk
Insert U-Disk
Insert your U-disk into the device via USB host transfer cable. When ready for use, enter into the file
browser, switch to the USB folder to view it.
Remove U-Disk
Close all applications or documents which have been opened on the U-disk. Tap → Settings →
Storage →USB storage → Unmount this storage device. When it displayed Mount this device and
then you can unplug the U-disk.
☆ Don’t insert and remove the U-disk repeatedly in a short time, as this may cause damage to the U-disk.
5 USING MICRO-SD CARD
☆ The device supports a maximum 32GB microSD card.
Insert your card into the microSD slot until it clicks into place. It’s OK.
Remove microSD Card
Close all applications or documents which have been opened on the card. Tap → Settings →
Storage →SD card → Unmount this storage device. When it displayed Mount this device and then
press the card lightly; it is partially ejected allowing you to pull the card out.
☆ Don’t insert and remove the U-disk repeatedly in a short time, as this may cause damage to the card.
☆ We recommend using major brands of memory cards to avoid incompatibility.
6 GETTING STARTED
Charge the device
☆ It is not recommended to use the device while charging.
Plug the power adapter into an electrical wall outlet, and then connect to the device to fully charge the battery
before use (A full charge takes about 6 hours in the off status).
Turn the device on
Press & hold the power button 2 seconds.
HDMI video play
This device support through the Mini HDMI connected with TV, it makes TV and device displayed
synchronic. For using this feature, insert the Mini HDMI cable into the right side of the device interface to
connect with TV.
TV screen adjustment
After connecting HDMI, Enter into Settings → Display → TV screen adjustment,By
adjusting the drag strips in the interface to change the width and height of the TV side.