User's Manual

VII. Information for energy saving – Power Options
1.





Information for energy saving
sequence of steps for achieving a stable power condition 
switch on the notebook – the notebook is booting – log on as a user – wait till all
hardware 
profile and possibly connected peripherals are loaded

all power saving settings were set by the manufacturer already. The user can ,
however, change this settings at control panel energy options. The display is switched
off after 10/ 4 min (power-/battery mode) and the sleep mode is executed after 10/ 4
minutes (power-/ battery mode) of user inactivity. 
switch of Wi-Fi, Bluetooth if they are not required 
2. Power options
in the taskbar in the lower left




To access the Power Options, right-click the Start Menu icon
corner of the screen and select Power Options.
The Power Options control panel icon in Windows allows you to configure power
management features for your computer. You can conserve power by means of power
plans and configure the options for the power button, sleep button (Fn + ESC),
computer lid (when closed), display and sleep mode (the default power saving state)
from the left menu. Note that the Power saver plan may have an affect on computer
performance.
Click to select one of the existing plans, or click Create a power plan in the left menu
and select the options to create a new plan. Click Change Plan Settings and click
Change advanced power settings to access further configuration options.
14