User Manual Group Training Data Hub English Version:V0.
1 Product Introduction Thank you for using this product, the product is a group training data hub, used for receiving wireless data from ANT+ and Bluetooth sports devices, and send to the web or Mobile Application by WiFi . 2 Product Accessories Main Device Power Adapter 5V 1A (Notice: The power adapter is an optional accessory, which may be different from the figure in different regions, please refer to the actual product.
Light and Socket Description Top ① ② ④ Behind ⑤ ⑦ ⑧ ⑨ ① WAN LED: Steady light indicates that the current communication with the server is the WAN network port. ② WiFi LED: Steady light indicates that the current communication with the server is WiFi. ④ Power LED: Steady light means power on / Light off means power off. ⑤ Reset button: Press and hold for 5 seconds to restore the factory settings, all lights will be on, and the device will be reset after the operation is completed.
Network Setting a. Scan QR code to download the App(HubConfig), and install the App. (Notice: For IOS system, it will pop up with the application security verification when installing, please set to trust, by entering the phone Settings →Device Management →Shenzhen CooSpo Tech Co.
Basic Parameters Wireless Communication BLE: Communication distance 30m, standard BLE5.0 ANT+: Communication distance 30m, standard 2.4GHz ISM WiFi: Communication distance 50m, standard 2.4G&5G Dual frequency (IEEE 802.11 a/b/g/n) Simultaneous Scanning / Number of Connected Devices BLE / ANT collect broadcast data and upload to the server, it can scan up to 64 ANT+ devices with standard heart rate profile at the same time, no limit to the number of other types of devices.
FCC statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.