User manual

WWW.FOSCAM.COM FI8918W User Manual
If you click here, the camera will horizontally & vertically rotate and
then sto
p
at the center
Turn off IR light
Turn on IR light
Pre-determined location
Figure 2.19
: Click this icon; camera will rotate up and down. Click to stop.
: Click this icon; camera will rotate left and right. Click to stop.
: Click this icon, all the IR lights will turn on. Click to turn off them.
Flip & Mirror: You can choose flip or mirror if you set up the camera to show a reverse image.
Mode: There are three modes. (50HZ, 60HZ and outdoor)
Brightness and Contrast are also used to adjust the quality of the video.
Preset: You can create preset positions for the camera to go to directly from one position to
another. A total of 8 preset positions can be configured.
Pls follow the steps below to create preset positions:
1 Adjust the shooting area to a desired position.
2 Click set 1 to define your home position.
3 To add additional preset positions, pls repeat step1-2.
When the camera rotates to other position, only choose the preset num you have set and click go,
the camera will go to the desired position.
If you want to delete one position, only reset the position num.
For Firefox, Google Chrome and Safari
Click Live Video. There are several differences between IE and Firefox.
In Firefox, the snapshot button is under For Operator. Other functions under Live Video include:
refresh video, refresh parameters, audio and close audio. (Figure 2.20a)
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: [phone] Fax: [phone]
17