User manual

WWW.FOSCAM.COM FI8918W User Manual
Figure 3.18
Make sure your mailbox for sender supports SMTP. Four recipients can be added to receive
images. SMTP port is usually set as 25. Some SMTP servers have their own port, such as 587
or 465 and Transport Layer Security usually is None. If you use Gmail, Transport Layer Security
must be set to TLS or STARTTLS and SMTP Port must be set to 465 or 25 or 587, which port
you choose should be decided by which Transport Layer Security you select.
NOTE: Click Submit first before choosing Test.
Click Test to see if SMTP has been successfully configured.
.
Figure 3.19
If an error occurs with one of the following errors after clicking Test, verify the information you
entered is correct and select Test again.
1) Cannot connect to the server
2) Network Error. Please try later
3) Server Error
4) Incorrect user or password
5) The sender is denied by the server. Maybe the server need to authenticate the user, please
check it and try again
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: [phone] Fax: [phone]
30