User manual

WWW.FOSCAM.COM FI8918W User Manual
Figure 3.22
Figure 3.23
FTP server: If your FTP server is set up in LAN, you can set as Figure 3.22
If you have a FTP server which you can access on the internet, you can set as Figure 3.23
FTP Port: Usually the port is 21
FTP Upload Folder: Make sure that the folder you plan to store images exists. For camera
couldn’t create the folder itself. Also, the folder must be erasable.
FTP Mode: It supports standard (POST) mode and passive (PASV) mode
Upload Image Now: This option will upload images when you enable the checkbox.
Upload Interval refers to the time between the current image and the next image.
Enable Set Filename: You can set a name for the uploaded image when you enable the
checkbox. If you select it, the uploaded image will be named after the filename you set. So the
next image will cover the last image and the FTP Upload Folder will only have one uploaded
image which named after the filename you set.
Filename: Fill in a name for the uploaded image. This name is different from the alarm image.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: [phone] Fax: [phone]
33