User manual

WWW.FOSCAM.COM FI8918W User Manual
Select this option
Figure 3.28
If you want to specify when the camera sends mails in a specific time when motion is detected,
You can choose Scheduler and set the time range for motion alarm. (Figure 3.31-3.33)
5) Upload images via FTP server when motion trigger.
To upload images to an FTP server when motion is detected, you must set FTP Service
Settings first and then set motion alarm as pictured below (Figure 3.29)
.
Select this option
You can set an interval for uploading images
Figure 3.29
There are two ways to set the alarm.
1) Alarm at any time when motion is detected.
Don’t choose Scheduler. Click Submit and the camera will alarm at any time when motion is
detected.
Another way: Choose Scheduler, and click “set All”, you can see all time box will turn blue as the
following picture. Click Submit and the camera will alarm at any time when motion is detected.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: [phone] Fax: [phone]
36