User manual

WWW.FOSCAM.COM FI8918W User Manual
3.14 PTZ Settings
You can set pan/tilt speed. Normally, PT speed is 3; The larger the setting number, the lower
speed. Don’t enable the checkbox “disable preset” if you want to use the function of preset, it will
be effective after you reboot device
Figure 3.34
Patrol rounds horizontal: Set the round between 1 and 10, then click Submit. Back to “For
Operator”. Click the Horizon patrol button, the camera will patrol the rounds horizontally you
have set and then stop if you don’t click Stop horizon patrol button. For example, you set 5 for the
patrol rounds. Click submit and back to For Operator. Click the Horizon patrol button and do not
click the Stop horizon patrol button, the camera will patrol 3 rounds and then stop automatically.
Patrol rounds vertical: Set the round between 1 and 10, then click submit. Back to “For
Operator”. Click the Vertical patrol button, the camera will patrol the rounds vertically you set and
then stop if you don’t click Stop vertical patrol button.
Note: Patrol rounds horizontal/vertical has no relation with the rotation rounds that camera
reboots.
3.15 Upgrade Device Firmware
When you upgrade the camera, please upgrade system firmware first and then upgrade the Web
UI.
Figure 3.35
NOTE: After you upgrade the system firmware, you will not be able to view the camera in a
browser before you upgrade the Web UI. Make sure the IP camera tool on your computer could
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: [phone] Fax: [phone]
39