User manual

WWW.FOSCAM.COM FI8918W User Manual
find your camera’s IP before you choose upgrade in browser.
The Web UI only can be upgraded by IP camera tool after you upgrade the system firmware.
Click Browse, choose the correct bin file and then click Submit to upgrade.
Don’t shut down the power during upgrade until the IP camera tool finds the camera again.
3.16 Backup & Restore Settings
Click Submit to save all the parameters you have set. These parameters will be stored in a bin
file for future use. The bin file can be restored to load the parameters that were set.
Figure 3.36
3.17 Restore Factory Settings
All parameters will return to factory settings if selected.
Figure 3.37
3.18 Reboot Device
Click Reboot Device to reboot the camera. This is similar to unplugging the power to the
camera.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: [phone] Fax: [phone]
40