User manual

WWW.FOSCAM.COM FI8918W User Manual
WIFI Antenna: Wireless Antenna
Microphone: Built-in microphone
Speaker: Built-in speaker
1.3.2 Back View
Figure 1.2
LAN: RJ-45/10-100 Base T
Power: DC 5V/2A Power supply
Network Light: The LED will blink when power and network cable are plugged in
Power Light: If the power adapter works well, the light will turn on
Audio Input: This jack is used to plug an external microphone
Audio Output: This jack is used to plug an external speaker
1.3.3 Bottom View
There are three stickers at the bottom of the camera; it is an important feature of original Foscam
cameras. If your camera does not have any of these three stickers, it may be a clone one.
Cloned Foscam cameras cannot use original firmware and not eligible obtain warranty or
technical services.
Figure 1.3
Reset button: Press and hold down the RESET BUTTON for 15 seconds. Releasing the reset
button, username and password will back to the factory default administrator username and
password. You must power on the camera before reset.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: [phone] Fax: [phone]
3