User's Manual
Table Of Contents
- 1 WELCOME
- 2 SOFTWARE OPERATION
- 3 How to do settings in For Administrator
- 3.1 Alias Settings
- 3.2 Date & Time Settings
- 3.3 User Settings
- 3.4 Multi-Device Settings
- 3.5 Basic Network Settings
- 3.6 Wireless LAN Settings
- 3.7 ADSL Settings
- 3.8 UPnP Settings
- 3.9 DDNS Service Settings
- 3.10 Mail Service Settings
- 3.11 FTP Service Settings
- 3.12 Alarm Service Settings
- 3.13 PTZ Settings
- 3.14 Upgrade Device Firmware
- 3.15 Backup & Restore Settings
- 3.16 Restore Factory Settings
- 3.17 Reboot Device
- 3.18 Log
- 4 APPENDIX
- 4.1 Frequently Asked Questions
- 4.1.1 I have forgotten the administrator username and/or password
- 4.1.2 Subnet doesn’t match, dbclick to change
- 4.1.3 No Pictures Problems
- 4.1.4 Can’t access IP camera in internet
- 4.1.5 IP Camera Tool could not find camera’s IP
- 4.1.6 UPnP always failed
- 4.1.7 Couldn’t find the shortcut on desktop after install IP camera tool
- 4.1.8 I can’t change the record path
- 4.1.9 I can’t find multi-device settings and record icon
- 4.1.10 Camera can not connect wireless
- 4.1.11 I can’t see other cameras which in multi-device when remote access
- 4.1.12 Only see black screen or unreasonable code when remote login
- 4.2 Default Parameters
- 4.3 Specifications
- 4.1 Frequently Asked Questions
- 5 OBTAINING TECHNICAL SUPPORT
- 6 changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
IPCAM User Manual
Figure 2.22
We can see the difference from Figure 2.21 and Figure 2.22.
Figure 2.21 has the three following options that Figure 2.22 does not have.
Device Info: In fact. Click Device Status when you use Firefox or Google browser. You will see
the same information with Figure 2.21.
Multi-Device Settings: The function is controlled by the activeX, so if you use Firefox or Google
browser. It is impossible to use this function.
Back: In Firefox or Google browser. It is easy to click Live Video or Device Status to go back.
NOTE: Audio, record and multi-device function are controlled by activeX controller, so if you use
firefox or google chrome, it is impossible to find these options.
3 How to do settings in For Administrator
3.1 Alias Settings
Default alias is anonymous. You can set a name for your camera here. Such as Ipcam, then click
Submit after change this.
Figure 3.0
www.foscam.com
- 18 -