User's Manual

IPCAM User Manual
path for them. Record path will store the recording file when record manually. (Click record icon
to record. Figure 2.18)
Alarm record path will store the recording file when motion trigger. (Set motion alarm first. (Figure
3.23)
The both default path is C:\Documents and Settings\All Users\Documents.
NOTE: In Windows7 or Vista, if you could not change the record path. Please set as
below:
Windows7 or Vista's security level is higher than Windows XP/2000.For "set record path"
function, user should add the Device IP address to the IE's 'Trusted sites' first. The step is:
IE browserÆToolÆInternet ProperÆSecurityÆTrusted sitesÆSitesÆAdd
3.4 Multi-Device Settings
The firmware inside the camera can support max 9 device monitoring at the same time.
3.4.1 Add cameras in LAN
In Multi-Device Settings page, you can see all devices searched in LAN. The 1st Device is the
default one. You can add more cameras in the list in LAN for monitoring. The inside software of
camera supports up to 9 IP Cameras online simultaneously. Click The 2nd Device and click the
item in the Device List in LAN, Alias, Host and Http Port will be filled in the boxes below
automatically. Enter the correct username and password then click Add. Add more cameras in
the same way. After add all cameras. Please choose Submit.
Figure 3.4
www.foscam.com
- 20 -