User's Manual

www

.foscam.co

Figure 4.70

CAUTION:

If your camera works well with the current firmware, we recommend not upgrading. Please don’t upgrade the

firmware unnecessarily. Your camera may be damaged if mis-configured during an upgrade.

NOTE:

Don’t

upgrade

the firmware

through

the web UI in WAN, or else the

upgrade

may

be failed.

Please ensure

you

have download the correct firmware

package

for

your

camera before

upgrading.

Read

the upgrade documentation (readme.txt file) in the upgrade package before you upgrade.

Upon download

ing

the firmware check the sizes of the .bin files.

They

must match the size in the

readme.txt file. If not, please download the firmware again until the sizes are the same. Your camera will

not function correctly if a corrupt .bin file is used.

4) Normally, only Device WEB UI need to be upgrade, please do not try to upgrade the Device Firmware.

5) Never shut down the power of the camera during upgrade until the IP camera restart and get connected.

6) After upgrade successfully, please clear the cache of browser, uninstall the old plugin and re-install it, then

reset the camera to the default factory settings before using the camera.

4.10.3 Patch Installation

Click "Browse" to select the correct patch file, and then click "Install Patch" to install the patch. Do not turn off

the power during it installing. After installing is complete, you will receive a system prompt.