User's Manual

www

.foscam.co

Shenzhen

Foscam

Intelligent

Technology

Co.,

Limited

Tel:

755

2674

5668

Fax:

755

2674

5168

Figure 4.23

Step 3: Please click on the Save button after all settings have been entered and disconnect the network cable. Never shut

down the power of the camera until the IP camera is able to connect to the wireless network.

The LAN IP address will disappear on the window of IP Camera Tool when the camera is configuring a wireless

connection. Wait about 1 minute, the camera should obtain a wireless connection, and the LAN IP of the camera will

show again on the window of the IP Camera Tool. The IP address may have changed after the camera receives a wireless

connection; we recommend setting a static local IP address if this IP address changes by right clicking the camera in IP

Camera Tools, setting a static IP, and pushing OK (see Figure3.35/3.36).

Congratulations! You have set up the wireless connection of the camera successfully.

NOTE :

If you fail to make a wireless connection, please refer to your seller or contact us directly for assistance.

4.3.3 PPPoE

If you are using a PPPoE connection, enable it and enter the User Name and Password for your PPPoE account.

1 Click the SSID of your router

and the relevant information

will be filled in the fields

automatically.

2 Enter the

password of

our router .