User's Manual

www

.foscam.co

Shenzhen

Foscam

Intelligent

Technology

Co.,

Limited

Tel:

755

2674

5668

Fax:

755

2674

5168

Figure 4.50

To enable motion detection, follow the steps below:

1 Enable Motion detection

2Sensitivity---- It supports three modes: Low, Middle and High. The higher the sensitivity, the camera will be more

easily alarmed. Select one motion sensitivity.

3 Trigger interval--- The interval time between two motion detections. Here supports

5s/6s/7s/8s/9s/10s/11s/12s/13s/14s/15s. Select one interval time.

4 Select the alarm indicators

When the motion has been detected, the alarm status will turn to Detect alarm.

Figure 4.51

There are three a larm indicators:

A Camera Sound and PC Sound

If the camera has connected with a speaker or other audio output device, if you select Camera Sound or PC

Sound, when the motion has been detected, the people around the camera will hear beep alarm sound.