User's Manual

ww.foscam.co

Shenzhen

Foscam

Intelligent

Technology

Co.,

Limited

Tel:

755

2674

5668

Fax:

755

2674

5168

Figure 2.8

Figure 2.9

Step 2:

Enter the username and password of the Administrator (default username is admin with

a blank password), and click “OK” to apply changes.

Step 3:

Wait around 10 seconds, you’ll see that the camera’s LAN IP address has changed. In

our example it was changed to 2000, so we see http://192.168.8.102:2000 in IP Camera Tool.

Also, the LAN IP address is now fixed at a static IP address of http://192.168.8.102:2000. This IP

address will not change even if the camera is powered off and back on, the camera will remain

on this LAN IP address. This is very important that a static LAN IP address is set, or you may

have problems later with remote access and seeing the camera remotely if the camera loses

power and reconnects on a different LAN IP address. Make sure you set a static LAN IP address!

Figure 2.10

What is Port forwarding?

If you have never done port forwarding before, you can open and view the following link to

understand the basic concept. Port forwarding allows for outside connections to access a

specific device on your network from anywhere in the world. Every router automatically blocks

Modify the Http Port.

Enter the Username and

assword

click OK.