User's Manual

ww.foscam.co

Shenzhen

Foscam

Intelligent

Technology

Co.,

Limited

Tel:

755

2674

5668

Fax:

755

2674

5168

4.2.5 Multi-Camera

If you want to view multi-surveillance screens on one window, you need to login one camera, and

set it as the main device, and do Multi-Device Settings, add other cameras to the first one

camera. Before you do multi-cams settings, you need to assign different port such as 81, 82, 83,

84, 85, 86, 87, 88 to the cameras if there is 8 cams installed.

The firmware within the camera can support a maximum of 9 devices monitoring all at the same

time. This page you can both add FOSCAM MJPEG and H.264 series cameras to the first

camera and view multi-surveillance screen on one window.

Add cameras in LAN

In Multi-Device Settings page, you can see all devices searched in LAN. The 1st Device is the

default one. You can add more cameras in the list in LAN for monitoring. The camera’s software

supports up to 9 IP Cameras online simultaneously. Click The 2nd Device and click the item in

the Device List in LAN, the Alias, Host and Http Port will be filled in the boxes below

automatically. Enter the correct username and password then click Add. Add more cameras in

the same way.

Figure 4.14

Camera Model: Our Company produces two series cameras: MJPEG and H.264. Here will show

1 Click it, camera model, alias,

host and HTTP Port will be

filled in the following boxes

automatically

2 Enter the User name and

password of the 2nd camera