User's Manual

50
w
w
ww.foscam.co
ww.foscam.co
m
m
Shenzhen
Shenzhen
Foscam
Foscam
Intelligent
Intelligent
Technology
Technology
Co.,
Co.,
Limited
Limited
Tel:
Tel:
86
86
755
755
2674
2674
5668
5668
Fax:
Fax:
86
86
755
755
2674
2674
5168
5168
50
4.3.5 UPnP
The default UPnP status is closed. You can enable UPnP, then the camera’s software will be
configured for port forwarding. Back to the “Device Status” panel, you can see the UPnP status:
Figure 4.33
The camera’s software will be configured for port forwarding. There may be issues with your
routers security settings, and sometimes may error. We recommend you configure port
forwarding manually on your router (Figure 4.30).
4.3.6 Port
This camera supports HTTP Port / Media Port / HTTPS Port. The Media port is used to view the
camera’s video stream, HTTP Port is used to access the camera remotely. Here HTTP and
Media port share the same port.
HTTP port / Media port: By default, the HTTP and Media port is set to 88. Also, they can be
assigned with another port number between 1 and 65535. But make sure they canl not be
conflict with other existing ports like 25, 21.
Figure 4.34